BH-USA / PWC - Boat Hoist Motor - 1500lb Capacity - 10% Off Sale

                                      www.allsunsolarproducts.com

BH-USA / PWC - Boat Hoist Motor - 1500lb Capacity

 * Free Shipping * Made in the USA * No Sales Tax *

This is a Marine Grade Boat Lift Motor. Rated for freshwater and saltwater environments.              The Boat Lift Motor has a 1500lb capacity and designed for personal watercraft lifts.

Housed in a compact unit capable of straight line lifting up to 1500 lbs.

Adaptable to most PWC side mount lifts. This PWC hoist will out-last and out-lift any
other hoist on the market. Encased in a powder-coated steel gear housing.

The hoist comes wired for 110 volt with a powdercoated, 3/4 hp motor and spring-loaded switch with a 6ft control cable. Easy to install - built to last.

Features
* Marathon 3/4HP motor included
* Bremas Spring Loaded - Manual Up/Down Switch
* 110V In-Plug - 6ft control cable
* One Year Warranty
* BH-PWC Gearbox included
* Powder-coated steel gear housing
* Installation manual included

One Year Manufacturers Warranty

www.allsunsolarproducts.com

BH-USA BH-45 / Boat Hoist Motor - Flat-Plate AC 110V - 4500 lb Capacity - On Sale

www.allsunsolarproducts.com 

                   BH-USA BH-45 / Boat Hoist Motor - Flat-Plate AC 110V - 4500 lb Capacity

* Free Shipping * Made in the USA * No Sales Tax *

This is a Marine Grade - Boat Lift Motor! Rated for freshwater and saltwater environments.

The BH-USA motors can lift more, last longer and run smoother than any other flat-plate hoist on the market! The back plate is available in a powder coated, hot-dipped galvanized or extruded aluminum.

BH-USA's high-performance hoists feature precision machined gears and wiring and pulleys 
specifically sized for the rated capacity of each model. This is the most advanced and best engineered flat-plate hoist available. BH-USA hoists, motors and gear plates are pretested under load before shipment.

* Manual Up/Down Bremis switch included (choose between maintain or spring loaded)
* Available in 110V or 220V. (choose from drop down menu above)

Specifications 
* Rated Capacity - 4500 lbs 
* Ridged 56 Frame
* AC 110V or 220V 
* Gear Ratio 96:1 
* Back Plate Bearing Bronze 
* 96-Tooth Gear Cast Iron 
* Sleeve Accepts 2 3/8" OD drive pipe (2" sch40 ID) 
* Hardened Bronze Worm
* Pulley Aluminum 10" OD with 3/4" bore 
* Elite 3/4 HP Motor / TENV included with 2" pulley 
* Motor Amperage 120v/15.2 amps / 240v/8 amps 
* Control cable length: 16 ft 
* GFCI cord length: 5 ft from switch to plug 
* Weight 75 lbs

Manufacturers Warranties
* Gear Plate Assembly - Life Time Warranty 
* Electric Motor: One Year 
* GFCI: 30 days 
* Drum Switch: 30 days

Free Shipping: Save up to $100.00 
We have reduced prices on volume purchases. (4 or more)
Please call or write our customer service department for a quote.

BH-USA - BH-A Drive 7000 - Boat Lift Motor - 7000 lb Capacity

www.allsunsolarproducts.com

BH-USA - BH-A Drive 7000 - Boat Lift Motor - 7000 lb Capacity

This is a Marine Grade Boat Lift Motor.

The most powerful Direct-Drive motor on the market! Fits all current boat lift applications. Designed for freshwater and saltwater environments.

The Boat Hoist BH-A Drive is capable of straight line lifting up to 7000 lbs.
The direct drive hoist motor has an advanced double worm-gear reducer!

The A-Drive is dependent on six press-in, rubber seals that keep the gear oil inside the gear housing.  The BH-A Drive is easy to install with the optional mounts. Seals are replaceable and all BH-A Drives come pre-lubed.

There is an output shaft on the larger reducer, designed to except a hardened shaft of 1.25” diameter.  The output shaft has a general mounting flange that can be bolted using four bolts to brackets  designed to install the hoist to the lift.

Free with every purchase:
* Boat Lift Up/Down switch - Maintain or Spring Loaded
* Available in 110V or 220V AC
* Installation Manual
* One Year Warranty
* Free technical support!

Specification
* 7000lb capacity
* Type 40:90
* Actual Ratios 50:50, 75:30
* Lube: Synthetic
* Motor 1.5 hp
* All aluminum design
* Motor Mount: 56C Adjustable
* No grease, no mess
* No belts to slip!
* Weight: 25 lbs (without motor)

* One Year Manufactures Warranty

www.allsunsolarproducts.com

BH-USA / Elite 3/4 HP - Boat Lift Motor - Winter Sale - One Year Warranty

www.allsunsolarproducts.com

BH-USA / Elite 3/4 HP - Boat Lift Motor

* Free Shipping * One Year Warranty * No Sales Tax *

The Elite 3/4 HP motor is a direct replacement for the AO smith motor.

This is a Marine Grade Boat Lift Motor. Designed for Freshwater and Saltwater environments.

The motor is compatible with any Boat Hoist USA, ACE or Hefty Hoist gear plate.
TENV motors are completely enclosed, so pests and dirt can not get into the motor. 
The motors are NEMA, UL, 56 frame and dual voltage.

The equipment guide is shipped with each order. The motor does not come with the 2" pulley or any wiring.
The motor is wired for 220v direct from the factory.

Specifications 
* HP 3/4
* Model: 60420 
* AMPS: 120V 11.4 
* AMPS: 240 5.7 
* SF: 1.0 
* FRAME: 56 
* Shaft: 5/8" OD 
* RPM: 1725 
* Capacitor: Start 
* Capacitor location: 12 o'clock 
* Compliance: UL 
* Weight: 27 lbs 
* Motor Dim: 7.25 (L) x 6.0(W) plus 2" cap. 8"(H)

* One Year Manufactures Warranty * Free Shipping: Save up to $100.00 *

We have reduced prices on volume purchases. (4 or more)
Please call or write our customer service department for a quote.

BH-USA - Leeson 1.5 HP - Boat Hoist Motor

                                              www.allsunsolarproducts.com

BH-USA - Leeson 1.5 HP - Boat Hoist Motor

* Free Shipping * One Year Warranty * No Sales Tax *

This is a Marine Grade Boat Lift Motor. Designed for Freshwater and Saltwater environments.

Leeson 1.5 HP motor is a direct replacement for the AO smith motor and will work on any Boat Hoist USA, ACE or Hefty Hoist gear plate. TENV motors are completely enclosed so insects and dirt cannot get into the motor.

Leeson motors are NEMA, UL, 56 frame and have dual voltage.
The equipment guide is shipped with each order. The motor does not come with the 2" pulley or additional wiring. The motor is wired for 220v direct from the factory.

Features
* Leeson 1.5 HP
* Model: C6C17NB47C
* FRAME 56
* Shaft 5/8" OD
* RPM 1725
* Capacitor: Start
* Capacitor location 12 o'clock
* AMPS 120V: 19.4
* AMPS 240V: 9.7
* SF: 1.0
* Compliance: UL and NEMA
* Weight: 37 lbs
* Motor Dim: 13"(l) x 6.5(w) +2" cap. 9"(H)

* One Year Manufactures Warranty *

www.allsunsolarproducts.com

BH-USA - GEM KRLS - Rotary Limit Switch

www.allsunsolarproducts.com

                                                     Boat Hoist Motor Accessories!

BH-USA - GEM KRLS - Rotary Limit Switch

* Free Shipping * One Year Warranty * Made in the USA *

Compatible with GEM Auto-Stop capable boat lift remotes.

Some boat lifts may require modification in order to be compatible with this limit switch.

Functions by counting the rotations of the cable winding pipe.
Enables pre-setting an up and down position for the boat lift.
Installation Manual and all wiring diagrams will be shipped with the order.

* One Year Manufacturers Warranty

www.allsunsolarproducts.com

Boat Hoist Motor Accessories!

www.allsunsolarproducts.com

                                                     Boat Hoist Motor Accessories!

BH-USA - GEM KRLS - Rotary Limit Switch

* Free Shipping * One Year Warranty * Made in the USA *

Compatible with GEM Auto-Stop capable boat lift remotes.

Some boat lifts may require modification in order to be compatible with this limit switch.

Functions by counting the rotations of the cable winding pipe.
Enables pre-setting an up and down position for the boat lift.
Installation Manual and all wiring diagrams will be shipped with the order.

* One Year Manufacturers Warranty

www.allsunsolarproducts.com

Hewitt 110V - AC Turnkey Shore Commander - Boat Lift Motor

                                   www.allsunsolarproducts.com

Hewitt 110V - AC Turnkey Shore Commander - Boat Lift Motor 

* Two Year Warranty * Free Shipping *

The Turnkey Shore Commander has a 6000lb capacity.

This is a 110V AC Direct Drive - Marine Grade Boat Lift Motor. Designed for harsh freshwater
and saltwater environments. Boat lift motor covers and canopy light included!

Double-sealed motor shaft and sealed electrical box and O-rings. The boat lift motor features 
industry-leading Direct Drive technology. Fits all current boat lift applications - easy to install!

In the event of a power failure, simply insert the back up bit into the end of the motor and turn.

Free with every purchase:
* Installation Kit ($119.95 value)
* Back Up Bit ($39.95 Value)
* Motor Cover ($150.00 value)
* Installation Manual

Features
* 110V AC Direct Drive - Marine Grade Boat Lift Motor
* 6000lb Capacity 
* Weather resistant boat lift motor cover
* Simple operation - easy to install
* Back Up Bit included
* Double-sealed motor shaft 
* Sealed electrical box and o-rings

Two Year Warranty

We have reduced prices on volume purchases. (2 or more)
Please call or write our customer service department

BH-USA - BH-A Drive 7000 - Boat Lift Motor - 7000 lb Capacity

www.allsunsolarproducts.com

BH-USA - BH-A Drive 7000 - Boat Lift Motor - 7000 lb Capacity

This is a Marine Grade Boat Lift Motor.

The most powerful Direct-Drive motor on the market! Fits all current boat lift applications. Designed for freshwater and saltwater environments.

The Boat Hoist BH-A Drive is capable of straight line lifting up to 7000 lbs.
The direct drive hoist motor has an advanced double worm-gear reducer!

The A-Drive is dependent on six press-in, rubber seals that keep the gear oil inside the gear housing.  The BH-A Drive is easy to install with the optional mounts. Seals are replaceable and all BH-A Drives come pre-lubed.

There is an output shaft on the larger reducer, designed to except a hardened shaft of 1.25” diameter.  The output shaft has a general mounting flange that can be bolted using four bolts to brackets  designed to install the hoist to the lift.

Free with every purchase:
* Boat Lift Up/Down switch - Maintain or Spring Loaded
* Available in 110V or 220V AC
* Installation Manual
* One Year Warranty
* Free technical support!

Specification
* 7000lb capacity
* Type 40:90
* Actual Ratios 50:50, 75:30
* Lube: Synthetic
* Motor 1.5 hp
* All aluminum design
* Motor Mount: 56C Adjustable
* No grease, no mess
* No belts to slip!
* Weight: 25 lbs (without motor)

* One Year Manufactures Warranty

www.allsunsolarproducts.com

AO Smith - Boat Hoist Replacement Motors

                                                www.allsunsolarproducts.com

                                               AO Smith - Boat Hoist Replacement Motors

BH-USA / Elite 1 HP - Boat Lift Motor 

* Free Shipping * One Year Warranty * No Sales Tax

This is a Marine Grade Boat Lift Motor. Designed for Freshwater and Saltwater environments. The Elite 1 HP motor is a direct replacement for the AO smith motor.

The motor is compatible with any Boat Hoist USA, ACE or Hefty Hoist gear plate.
TENV motors are completely enclosed, so insects and dirt will not get into the motor.
The motors are NEMA, UL, 56 frame and dual voltage.

The equipment guide is shipped with each order. The motor does not come with the 2" pulley or any wiring.  The motor is wired for 220v direct from the factory.

Specifications
* 1 HP
* Model: 60421
* AMPS: 120V 11.4
* AMPS: 240 5.7
* SF: 1.00
* FRAME: 56
* Shaft: 5/8" OD
* RPM: 1725
* Capacitor: Start
* Capacitor location: 12 o'clock
* Compliance: UL
* Weight: 33 lbs
* Motor Dim: 7.25 (L) x 6.0 (W) plus 2" cap. 8"(H)

* One Year Manufactures Warranty

www.allsunsolarproducts.com

BH-USA / Elite 3/4 HP - Boat Lift Motor - Winter Sale

www.allsunsolarproducts.com

BH-USA / Elite 3/4 HP - Boat Lift Motor

* Free Shipping * One Year Warranty * No Sales Tax *


The Elite 3/4 HP motor is a direct replacement for the AO smith motor.

This is a Marine Grade Boat Lift Motor. Designed for Freshwater and Saltwater environments.

The motor is compatible with any Boat Hoist USA, ACE or Hefty Hoist gear plate.
TENV motors are completely enclosed, so pests and dirt can not get into the motor. 
The motors are NEMA, UL, 56 frame and dual voltage.

The equipment guide is shipped with each order. The motor does not come with the 2" pulley or any wiring.
The motor is wired for 220v direct from the factory.

Specifications 
* HP 3/4
* Model: 60420 
* AMPS: 120V 11.4 
* AMPS: 240 5.7 
* SF: 1.0 
* FRAME: 56 
* Shaft: 5/8" OD 
* RPM: 1725 
* Capacitor: Start 
* Capacitor location: 12 o'clock 
* Compliance: UL 
* Weight: 27 lbs 
* Motor Dim: 7.25 (L) x 6.0(W) plus 2" cap. 8"(H)

* One Year Manufactures Warranty * Free Shipping: Save up to $100.00 *

We have reduced prices on volume purchases. (4 or more)
Please call or write our customer service department for a quote.

BH-USA / PWC - Boat Hoist Motor - 1500lb Capacity - 10% Off Sale

                                      www.allsunsolarproducts.com

BH-USA / PWC - Boat Hoist Motor - 1500lb Capacity

 * Free Shipping * Made in the USA * No Sales Tax *

This is a Marine Grade Boat Lift Motor. Rated for freshwater and saltwater environments.              The Boat Lift Motor has a 1500lb capacity and designed for personal watercraft lifts.

Housed in a compact unit capable of straight line lifting up to 1500 lbs.

Adaptable to most PWC side mount lifts. This PWC hoist will out-last and out-lift any
other hoist on the market. Encased in a powder-coated steel gear housing.

The hoist comes wired for 110 volt with a powdercoated, 3/4 hp motor and spring-loaded switch with a 6ft control cable. Easy to install - built to last.

Features
* Marathon 3/4HP motor included
* Bremas Spring Loaded - Manual Up/Down Switch
* 110V In-Plug - 6ft control cable
* One Year Warranty
* BH-PWC Gearbox included
* Powder-coated steel gear housing
* Installation manual included

One Year Manufacturers Warranty

www.allsunsolarproducts.com

BH-USA BH-45 / Boat Hoist Motor - Flat-Plate AC 110V - 4500 lb Capacity - On Sale

www.allsunsolarproducts.com 

                   BH-USA BH-45 / Boat Hoist Motor - Flat-Plate AC 110V - 4500 lb Capacity

* Free Shipping * Made in the USA * No Sales Tax *

This is a Marine Grade - Boat Lift Motor! Rated for freshwater and saltwater environments.

The BH-USA motors can lift more, last longer and run smoother than any other flat-plate hoist on the market! The back plate is available in a powder coated, hot-dipped galvanized or extruded aluminum.

BH-USA's high-performance hoists feature precision machined gears and wiring and pulleys 
specifically sized for the rated capacity of each model. This is the most advanced and best engineered flat-plate hoist available. BH-USA hoists, motors and gear plates are pretested under load before shipment.

* Manual Up/Down Bremis switch included (choose between maintain or spring loaded)
* Available in 110V or 220V. (choose from drop down menu above)

Specifications 
* Rated Capacity - 4500 lbs 
* Ridged 56 Frame
* AC 110V or 220V 
* Gear Ratio 96:1 
* Back Plate Bearing Bronze 
* 96-Tooth Gear Cast Iron 
* Sleeve Accepts 2 3/8" OD drive pipe (2" sch40 ID) 
* Hardened Bronze Worm
* Pulley Aluminum 10" OD with 3/4" bore 
* Elite 3/4 HP Motor / TENV included with 2" pulley 
* Motor Amperage 120v/15.2 amps / 240v/8 amps 
* Control cable length: 16 ft 
* GFCI cord length: 5 ft from switch to plug 
* Weight 75 lbs

Manufacturers Warranties
* Gear Plate Assembly - Life Time Warranty 
* Electric Motor: One Year 
* GFCI: 30 days 
* Drum Switch: 30 days

Free Shipping: Save up to $100.00 
We have reduced prices on volume purchases. (4 or more)
Please call or write our customer service department for a quote.

Elite 3/4 HP - Boat Lift Motor - Winter Sale - AO Smith Replacement

www.allsunsolarproducts.com

BH-USA / Elite 3/4 HP - Boat Lift Motor

* Free Shipping * One Year Warranty * No Sales Tax *

The Elite 3/4 HP motor is a direct replacement for the AO smith motor.

This is a Marine Grade Boat Lift Motor. Designed for Freshwater and Saltwater environments.

The motor is compatible with any Boat Hoist USA, ACE or Hefty Hoist gear plate.
TENV motors are completely enclosed, so pests and dirt can not get into the motor. 
The motors are NEMA, UL, 56 frame and dual voltage.

The equipment guide is shipped with each order. The motor does not come with the 2" pulley or any wiring.
The motor is wired for 220v direct from the factory.

Specifications 
* HP 3/4
* Model: 60420 
* AMPS: 120V 11.4 
* AMPS: 240 5.7 
* SF: 1.0 
* FRAME: 56 
* Shaft: 5/8" OD 
* RPM: 1725 
* Capacitor: Start 
* Capacitor location: 12 o'clock 
* Compliance: UL 
* Weight: 27 lbs 
* Motor Dim: 7.25 (L) x 6.0(W) plus 2" cap. 8"(H)

* One Year Manufactures Warranty * Free Shipping: Save up to $100.00 *

We have reduced prices on volume purchases. (4 or more)
Please call or write our customer service department for a quote.

BH-USA - BH-85 / Boat Hoist Motor - Flat-Plate / 110V - 8500 lb Capacity

                                              www.allsunsolarproducts.com

BH-USA - BH-85 / Boat Hoist Motor - Flat-Plate / 110V - 8500 lb Capacity

* Free Shipping * Made in the USA * No Sales Tax *

This is a marine grade - boat lift motor. Rated for freshwater and saltwater environments.

The BH-USA motors can lift more, last longer and run smoother than any other flat-plate hoist on the market!  The back plate is available in a powder coated or hot-dipped galvanized finish.

The BH85 has an 8500 lb capacity. Features a 10" dual drive pulley system.

Cast aluminum dual pulley system, drive belts and motor mount bolts included.

BH-USA's high-performance hoists feature precision machined gears and wiring and pulleys specifically sized for the rated capacity of each model. This is the most advanced and best engineered flat-plate hoist available. BH-USA hoists, motors and gear plates are pretested under load before shipment.

* Manual Up/Down Bremis Switch included (Maintain or Spring Loaded)
* Available in 110V or 220V. (choose from drop down menu above)

Kit Includes
* 8500 lb Rated Gear plate assembly
* 1.5 hp Leeson Motor wired with switch and GFCI
* Cast aluminum dual pulley system and drive belts and motor mount bolts
* Bremis Up/Down Switch

Specifications
* Capacity - 8500 lbs
* Gear Ratio 96:1
* 11V or 220V
* Ridged 56 Frame
* Back Plate Bearing Bronze
* 96-Tooth Gear: Hardened Bronze
* Sleeve Accepts 2 3/8" OD drive pipe (2" sch40 ID)
* Worm: Hardened Steel
* Pulley Dual Aluminum 10" OD with 3/4" bore
* Leeson 1.5 HP Motor - TENV included with 2" dual pulley
* Motor Amperage 120v/19.6 240v/9.8
* Control Cable Length 16 ft
* Cord length 5 ft from switch to plug
* Weight: 92 lbs

Manufacturers Warranties
* Gear Plate Assembly- Life Time Warranty
* Electric Motor 1 yr from purchase
* GFCI 30 days from purchase
* Drum Switch 30 days from purchase

Free Shipping: Save up to $100.00
We have reduced prices on volume purchases. (4 or more)
Please call or write our customer service department for a quote.

BH - USA - BH-35 / Boat Hoist Motor / Flat-Plate 110V - 3500lb Capacity

                                                  www.allsunsolarproducts.com

BH - USA - BH-35 / Boat Hoist Motor / Flat-Plate 110V - 3500lb Capacity 

* Free Shipping * Made in the USA * No Sales Tax *

This is a Marine Grade - Boat Lift Motor! Rated for freshwater and saltwater environments.  The back plate is available in a powder coated, hot-dipped galvanized or extruded aluminum.

BH-USA's high-performance hoists feature precision machined gears and wiring and pulleys  specifically sized for the rated capacity of each model. This is the most advanced and best engineered  flat-plate hoist available. BH-USA hoists, motors and gear plates are pretested under load before shipment.

* Manual Up/Down Bremis switch included (choose between maintain or spring loaded)
* Available in 110V or 220V. (choose from drop down menu above)

Kit Includes:
* 3500 lb Rated Gear plate assembly
* 3/4 HP Elite Motor wired with switch and GFCI
* 10" aluminum pulley and drive belt
* Motor mount bolts, belts and equipment guide

Specifications
* Rated Capacity - 3500 lbs
* AC 110V or 220V
* Gear Ratio 96:1
* Ridged 56 Frame
* Back Plate Bearing Bronze
* 96-Tooth Gear Cast Iron
* Sleeve Accepts 2 3/8" OD drive pipe (2" sch40 ID)
* Hardened Bronze Worm
* Pulley Metal 10" OD with 3/4" bore
* Electric Motor 3/4 HP TENV Included with 2" pulley
* Motor Amperage 120v/12 / 240v/6.1
* GFCI cord length 5 ft from switch to plug
* Manufactured Longview, Texas
* Weight 65 lbs

Manufacturers Warranties:
* Gear Parts Assembly - Lifetime Warranty
* Electric Motor: 1 Year
* GFCI: 30 days
* Drum Switch: 30 days

Free Shipping: Save up to $100.00
We have reduced prices on volume purchases. (4 or more)
Please call or write our customer service department for a quote

www.allsunsolarproducts.com

AO Smith - Boat Hoist Replacement Motors

                                                  www.allsunsolarproducts.com

                                               AO Smith - Boat Hoist Replacement Motors

BH-USA / Elite 1 HP - Boat Lift Motor 

* Free Shipping * One Year Warranty * No Sales Tax

This is a Marine Grade Boat Lift Motor. Designed for Freshwater and Saltwater environments. The Elite 1 HP motor is a direct replacement for the AO smith motor.

The motor is compatible with any Boat Hoist USA, ACE or Hefty Hoist gear plate.
TENV motors are completely enclosed, so insects and dirt will not get into the motor.
The motors are NEMA, UL, 56 frame and dual voltage.

The equipment guide is shipped with each order. The motor does not come with the 2" pulley or any wiring.  The motor is wired for 220v direct from the factory.

Specifications
* 1 HP
* Model: 60421
* AMPS: 120V 11.4
* AMPS: 240 5.7
* SF: 1.00
* FRAME: 56
* Shaft: 5/8" OD
* RPM: 1725
* Capacitor: Start
* Capacitor location: 12 o'clock
* Compliance: UL
* Weight: 33 lbs
* Motor Dim: 7.25 (L) x 6.0 (W) plus 2" cap. 8"(H)

* One Year Manufactures Warranty

www.allsunsolarproducts.com

BH-USA / Elite 3/4 HP - Boat Lift Motor

www.allsunsolarproducts.com

BH-USA / Elite 3/4 HP - Boat Lift Motor

* Free Shipping * One Year Warranty * No Sales Tax *



The Elite 3/4 HP motor is a direct replacement for the AO smith motor.

This is a Marine Grade Boat Lift Motor. Designed for Freshwater and Saltwater environments.

The motor is compatible with any Boat Hoist USA, ACE or Hefty Hoist gear plate.
TENV motors are completely enclosed, so pests and dirt can not get into the motor. 
The motors are NEMA, UL, 56 frame and dual voltage.

The equipment guide is shipped with each order. The motor does not come with the 2" pulley or any wiring.
The motor is wired for 220v direct from the factory.

Specifications 
* HP 3/4
* Model: 60420 
* AMPS: 120V 11.4 
* AMPS: 240 5.7 
* SF: 1.0 
* FRAME: 56 
* Shaft: 5/8" OD 
* RPM: 1725 
* Capacitor: Start 
* Capacitor location: 12 o'clock 
* Compliance: UL 
* Weight: 27 lbs 
* Motor Dim: 7.25 (L) x 6.0(W) plus 2" cap. 8"(H)

* One Year Manufactures Warranty * Free Shipping: Save up to $100.00 *

We have reduced prices on volume purchases. (4 or more)
Please call or write our customer service department for a quote.

Hewitt 110V - AC Turnkey Shore Commander - Boat Lift Motor

                                           www.allsunsolarproducts.com

Hewitt 110V - AC Turnkey Shore Commander - Boat Lift Motor 

* Two Year Warranty * Free Shipping *

The Turnkey Shore Commander has a 6000lb capacity.

This is a 110V AC Direct Drive - Marine Grade Boat Lift Motor. Designed for harsh freshwater
and saltwater environments. Boat lift motor covers and canopy light included!

Double-sealed motor shaft and sealed electrical box and O-rings. The boat lift motor features 
industry-leading Direct Drive technology. Fits all current boat lift applications - easy to install!

In the event of a power failure, simply insert the back up bit into the end of the motor and turn.

Free with every purchase:
* Installation Kit ($119.95 value)
* Back Up Bit ($39.95 Value)
* Motor Cover ($150.00 value)
* Installation Manual

Features
* 110V AC Direct Drive - Marine Grade Boat Lift Motor
* 6000lb Capacity 
* Weather resistant boat lift motor cover
* Simple operation - easy to install
* Back Up Bit included
* Double-sealed motor shaft 
* Sealed electrical box and o-rings

Two Year Warranty

We have reduced prices on volume purchases. (2 or more)
Please call or write our customer service department

BH-USA / PWC - Boat Hoist Motor - 1500lb Capacity

                                      www.allsunsolarproducts.com

BH-USA / PWC - Boat Hoist Motor - 1500lb Capacity

 * Free Shipping * Made in the USA * No Sales Tax *

This is a Marine Grade Boat Lift Motor. Rated for freshwater and saltwater environments.              The Boat Lift Motor has a 1500lb capacity and designed for personal watercraft lifts.

Housed in a compact unit capable of straight line lifting up to 1500 lbs.

Adaptable to most PWC side mount lifts. This PWC hoist will out-last and out-lift any
other hoist on the market. Encased in a powder-coated steel gear housing.

The hoist comes wired for 110 volt with a powdercoated, 3/4 hp motor and spring-loaded switch with a 6ft control cable. Easy to install - built to last.

Features
* Marathon 3/4HP motor included
* Bremas Spring Loaded - Manual Up/Down Switch
* 110V In-Plug - 6ft control cable
* One Year Warranty
* BH-PWC Gearbox included
* Powder-coated steel gear housing
* Installation manual included

One Year Manufacturers Warranty

www.allsunsolarproducts.com

BH - USA - BH-35 / Boat Hoist Motor / Flat-Plate 110V - 3500lb Capacity

                                                  www.allsunsolarproducts.com

BH - USA - BH-35 / Boat Hoist Motor / Flat-Plate 110V - 3500lb Capacity 

* Free Shipping * Made in the USA * No Sales Tax *

This is a Marine Grade - Boat Lift Motor! Rated for freshwater and saltwater environments.  The back plate is available in a powder coated, hot-dipped galvanized or extruded aluminum.

BH-USA's high-performance hoists feature precision machined gears and wiring and pulleys  specifically sized for the rated capacity of each model. This is the most advanced and best engineered  flat-plate hoist available. BH-USA hoists, motors and gear plates are pretested under load before shipment.

* Manual Up/Down Bremis switch included (choose between maintain or spring loaded)
* Available in 110V or 220V. (choose from drop down menu above)

Kit Includes:
* 3500 lb Rated Gear plate assembly
* 3/4 HP Elite Motor wired with switch and GFCI
* 10" aluminum pulley and drive belt
* Motor mount bolts, belts and equipment guide

Specifications
* Rated Capacity - 3500 lbs
* AC 110V or 220V
* Gear Ratio 96:1
* Ridged 56 Frame
* Back Plate Bearing Bronze
* 96-Tooth Gear Cast Iron
* Sleeve Accepts 2 3/8" OD drive pipe (2" sch40 ID)
* Hardened Bronze Worm
* Pulley Metal 10" OD with 3/4" bore
* Electric Motor 3/4 HP TENV Included with 2" pulley
* Motor Amperage 120v/12 / 240v/6.1
* GFCI cord length 5 ft from switch to plug
* Manufactured Longview, Texas
* Weight 65 lbs

Manufacturers Warranties:
* Gear Parts Assembly - Lifetime Warranty
* Electric Motor: 1 Year
* GFCI: 30 days
* Drum Switch: 30 days

Free Shipping: Save up to $100.00
We have reduced prices on volume purchases. (4 or more)
Please call or write our customer service department for a quote

www.allsunsolarproducts.com

BH-USA BH-45 / Boat Hoist Motor - Flat-Plate AC 110V - 4500 lb Capacity

www.allsunsolarproducts.com 

                   BH-USA BH-45 / Boat Hoist Motor - Flat-Plate AC 110V - 4500 lb Capacity

* Free Shipping * Made in the USA * No Sales Tax *

This is a Marine Grade - Boat Lift Motor! Rated for freshwater and saltwater environments.

The BH-USA motors can lift more, last longer and run smoother than any other flat-plate hoist on the market! The back plate is available in a powder coated, hot-dipped galvanized or extruded aluminum.

BH-USA's high-performance hoists feature precision machined gears and wiring and pulleys 
specifically sized for the rated capacity of each model. This is the most advanced and best engineered flat-plate hoist available. BH-USA hoists, motors and gear plates are pretested under load before shipment.

* Manual Up/Down Bremis switch included (choose between maintain or spring loaded)
* Available in 110V or 220V. (choose from drop down menu above)

Specifications 
* Rated Capacity - 4500 lbs 
* Ridged 56 Frame
* AC 110V or 220V 
* Gear Ratio 96:1 
* Back Plate Bearing Bronze 
* 96-Tooth Gear Cast Iron 
* Sleeve Accepts 2 3/8" OD drive pipe (2" sch40 ID) 
* Hardened Bronze Worm
* Pulley Aluminum 10" OD with 3/4" bore 
* Elite 3/4 HP Motor / TENV included with 2" pulley 
* Motor Amperage 120v/15.2 amps / 240v/8 amps 
* Control cable length: 16 ft 
* GFCI cord length: 5 ft from switch to plug 
* Weight 75 lbs

Manufacturers Warranties
* Gear Plate Assembly - Life Time Warranty 
* Electric Motor: One Year 
* GFCI: 30 days 
* Drum Switch: 30 days

Free Shipping: Save up to $100.00 
We have reduced prices on volume purchases. (4 or more)

Please call or write our customer service department for a quote.

BH-USA - BH-85 / Boat Hoist Motor - Flat-Plate / 110V - 8500 lb Capacity

                                              www.allsunsolarproducts.com

BH-USA - BH-85 / Boat Hoist Motor - Flat-Plate / 110V - 8500 lb Capacity

* Free Shipping * Made in the USA * No Sales Tax *

This is a marine grade - boat lift motor. Rated for freshwater and saltwater environments.

The BH-USA motors can lift more, last longer and run smoother than any other flat-plate hoist on the market!  The back plate is available in a powder coated or hot-dipped galvanized finish.

The BH85 has an 8500 lb capacity. Features a 10" dual drive pulley system.

Cast aluminum dual pulley system, drive belts and motor mount bolts included.

BH-USA's high-performance hoists feature precision machined gears and wiring and pulleys specifically sized for the rated capacity of each model. This is the most advanced and best engineered flat-plate hoist available. BH-USA hoists, motors and gear plates are pretested under load before shipment.

* Manual Up/Down Bremis Switch included (Maintain or Spring Loaded)
* Available in 110V or 220V. (choose from drop down menu above)

Kit Includes
* 8500 lb Rated Gear plate assembly
* 1.5 hp Leeson Motor wired with switch and GFCI
* Cast aluminum dual pulley system and drive belts and motor mount bolts
* Bremis Up/Down Switch

Specifications
* Capacity - 8500 lbs
* Gear Ratio 96:1
* 11V or 220V
* Ridged 56 Frame
* Back Plate Bearing Bronze
* 96-Tooth Gear: Hardened Bronze
* Sleeve Accepts 2 3/8" OD drive pipe (2" sch40 ID)
* Worm: Hardened Steel
* Pulley Dual Aluminum 10" OD with 3/4" bore
* Leeson 1.5 HP Motor - TENV included with 2" dual pulley
* Motor Amperage 120v/19.6 240v/9.8
* Control Cable Length 16 ft
* Cord length 5 ft from switch to plug
* Weight: 92 lbs

Manufacturers Warranties
* Gear Plate Assembly- Life Time Warranty
* Electric Motor 1 yr from purchase
* GFCI 30 days from purchase
* Drum Switch 30 days from purchase

Free Shipping: Save up to $100.00
We have reduced prices on volume purchases. (4 or more)
Please call or write our customer service department for a quote.